We're Wraith Precision, not Wraith so-so.
When you want it done well and right, come to us. We can do just about anything you need with our well-equipped onsite shop and expertise. Our capabilities include vertical milling (CNC), lathe work, grinding, sanding, sand blasting, cutting/sawing, welding and more.
No appointment is necessary to bring your gun in for service.
Service times vary depending on the time of year. Hunting season is a busy time for us with cleanings, scope mountings and repairs, so please keep that in mind October - December where we tend to run 3-4 weeks on work orders. If you're in a hurry, we do offer speedier service for a rush fee. Please call ahead and find out our current lead time if your project is time-sensitive or check our Current Gunsmithing Work Order Time Frame for an estimate.
Gunsmithing Services Price List
This list is not all-inclusive, and pricing is subject to change on a case-by-case basis at our discretion, but it should give you a pretty good idea of what our gunsmithing services cost generally. Services are sorted alphabetically. Not seeing a service you need? Give us a call 262-696-4204 or use our contact form.
Gunsmithing Hourly Shop Rate: $65.00
Gunsmithing Services - Minimum Charge: $45.00
Accessories - Picatinny Rail (M-LOK) - Install on AR15 M-LOK Compatible Handguard (Rail Not Included): $16.25
Accessory - Bore Sight Laser Aiming Device: $20.00
Action Smoothing: $60.00
Assemble AR10 / AR15 Upper (Parts Purchased From Wraith Precision): $75.00
Assemble AR 10 / AR 15 Lower Receiver (Parts Purchased Elsewhere): $150.00
Assemble AR 10 / AR 15 Lower Receiver (Parts Purchased From Wraith Precision): $75.00
Assemble AR 9 Lower Receiver (Parts Purchased From Wraith Precision): $70.00
Assemble AR 9 Upper Receiver (Parts Purchased From Wraith Precision): $70.00
Assemble AR10 / AR15 Upper (Parts Purchased Elsewhere): $150.00
Assemble Slide (Slide & Parts not included): $45.00
Assembly - Disassemble/Reassemble Complete AR9 Upper Receiver (Hourly Shop Rate - $98.00 Min): $98.00
Barrel Work - Adjust Port Size - (Stripped Upper or Barrel Only): $45.00
Barrel Work - Cut & Crown Barrel (Stripped Receiver): $130.00
Barrel Work - Cut, Crown & Thread Barrel (Stripped Barreled Action): $155.00
Barrel Work - Cut, Crown, Thread and Install Barrel: $190.00
Barrel Work - Drill & Tap Shotgun Barrel for Front Bead or Fiber Optic Sight - W/Sight Installation: $65.00
Barrel Work - Install Barrel - AR Platform Rifle (Non-Timed Barrel Nut): $40.00
Barrel Work - Remove Barrel From Receiver & Reinstall: $30.00
Barrel Work - Remove Bore Obstruction: $40.00
Barrel Work - Remove Stuck Barrel Nut - (AR15 or AR10 Platform): $40.00
Barrel Work - Remove Stuck Case: $45.00
Barrel Work - Remove Stuck Choke Tube - Removal Only: $40.00
Barrel Work - Remove Stuck Choke Tube - W/Choke Tube & Muzzle Restoration: $50.00
Barrel Work - Shorten Shotgun Barrel: $65.00
Barrel Work - Thread Muzzle End of Barrel - (3/4" - 24TPI): $135.00
Barrel Work - Thread Muzzle End of Barrel - (1/2" - 28TPI) - (Rim Fire Rifle): $135.00
Barrel Work - Thread Muzzle End of Barrel - (5/8" - 24TPI): $135.00
Barrel Work - Thread Muzzle End of Barrel 1/2" - 28TPI - (Center Fire Rifle) - (Stripped Receiver): $135.00
Bluing - Touch Up: $40.00
Bolt Catch - Replace Bolt Catch - AR9 / AR10 / AR15 (Bolt Catch Not Included): $40.00
Bore Sight Adjustable Iron Sights: $25.00
Charging Handle - Replace Charging Handle - AR10/AR15/AR9: $7.00
Check Headspace - AR10 / AR15: $30.00
Check Headspace (Bolt W/O Plunger Style Ejector): $20.00
Clean & Oil - Black Powder Rifle: $65.00
Clean & Oil - Disassemble/Clean & Oil/Reassemble Pistol Magazine: $16.25
Clean & Oil - Level 1 Clean & Oil - (Revolver): $45.00
Clean & Oil - Level 1 Clean & Oil - (Semi-Auto Handgun): $40.00
Clean & Oil - Level 1 Clean & Oil - (Semi-Auto or Pump Action Shotguns & Rifles): $65.00
Clean & Oil - Level 1 Clean & Oil - (Top Break Single Shot Rifle or Shotgun): $45.00
Clean & Oil - Level 2 Clean & Oil - ( Lever Action Rifle): $85.00
Clean & Oil - Level 2 Clean & Oil - (Bolt Action Rifle): $135.00
Clean & Oil - Level 2 Clean & Oil - (Semi-Auto Handgun): $65.00
Clean & Oil - Level 2 Clean & Oil - (Semi-Auto or Pump Action Shotguns & Rifles): $135.00
Clean & Oil -Derringer Style Pistol: $50.00
Custom Machining: $85.00
Cut / Recut Dovetails: $85.00
Diagnostic Evaluation: $40.00
Dimple AR Barrel: $32.50
Dimple Barrel - (Stripped Barreled Upper or Barrel Only): $45.00
Dimple Removal for Shotgun Magazine Tube Extension: $25.00
Dimple Removal for Shotgun Magazine Tube Extension (W/ Oil & Assembly): $45.00
Disassemble and Clean as Necessary to Diagnose Malfunction: $40.00
Disassembly / Assembly: $40.00
Drill and Tap Receiver for Optics Rail / Rings: $65.00
Ejector - Install Ejector Assembly - Break Open Shotgun ( 1x ): $40.00
Ejector - Install Ejector Assembly - Break Open Shotgun ( 2x ): $45.00
Engraving - Machine Set Up Fee - First Piece/Run ($30.00 Min): $40.00
Engraving - NFA Engraving AR15 Receiver: $68.00
Engraving - One Time Artwork Fee ($30.00 Min): $30.00
Extractor - Replace Extractor - Semi-Auto or Pump Action Rifles - (Parts Not Included): $97.50
Extractor Replacement - AR10 / AR15 Bolt (Extractor, Spring, Insert & O-Ring Not Included): $40.00
Finishing - Cerakote 15" AR15/AR10 Handguard - (Stripped - Single H-Series Color): $85.00
Finishing - Cerakote Glock Slide (Stripped - Single H-Series Color): $85.00
Finishing - Cerakote Glock Small Parts - (Disassembled - Single H-Series Color): $75.00
Finishing - Cerakote Services - (Min $50.00 - Call for Pricing): $50.00
Finishing - DuraCoat Services: $50.00
Fore End Grip/Hand Stop - M-LOK Mount (Grip/Hand Stop Not Included): $12.50
Fore End Grip/Hand Stop - Picatinny Mount (Grip/Hand Stop Not Included): $10.00
Function - Cycling Optimization Tuning - (AR Platform), Ammunition Not Included: $32.50
Function - Function Test Fire, Ammunition Not Included: $45.00
Function - New Barrel Break-in Protocol Surcharge: $15.00
Function - Test Fire: $20.00
Gas Block - Install Gas Block -AR Platform Rifle - (Dimpled Barrel): $40.00
Gas Block - Replace Gas Block - AR Platform Barrel - (Dimpled Barrel): $45.00
Gas Block - Replace Gas Block - AR10/AR15 - (Stripped Upper) - (Barrel Not Dimpled): $65.00
Glock Frame - Cerakote, Stripped, Single H-Series Color: $85.00
Grip - Install Grip on AR Platform Rifle/Pistol (Grip Not Included): $22.50
Grip - Modify Grip (Lower Receivers W/Takedown Pin Spring Retained by Grip): $10.00
Grip - Replace Grip - AR15 Platform Rifle/Pistol (Grip Not Included): $16.25
Handguard - - Remove and Reinstall Handguard (Surcharge Non-Stripped Upper): $45.00
Handguard (Free Float) - Install (AR Platform Rifle - Timed Barrel Nut): $45.00
Handguard Accessories - Install Bi-Pod (M-Lok Direct Mount): $20.00
Handguard Accessories - Install Hand Stop or Vertical Fore Grip: $20.00
Handguard Replacement - Free Float AR Platform - Non-timed Barrel Nut (Handguard Not Included): $150.00
Handguard Replacement (Free Float Handguard w/Timed Barrel Nut): $165.00
Light/Laser Comb Device - Mount Device & Bore Sight Laser: $45.00
Magazine Catch/Release - AR10/AR15: $16.25
Muzzle Device - Replace Muzzle Device - Crush Washer Timed - AR Platform (Muzzle Device & Crush Washer Not Included): $45.00
Muzzle Device - Install - Non-Timed or Crush Washer Timed (AR10 / AR15 / AR9): $40.00
Muzzle Device - Install - Shim Timed Muzzle Device - (AR15 / AR10): $45.00
Muzzle Device - Install & Time - Shoulder Timed at Time of Threading (Non-AR Platform Rifle): $65.00
Muzzle Device - Install Timed Muzzle Device - w/Pin & Weld - AR Platform, Devices Timed w/Shims - Add $15.00, Stripped Upper, Does Not Include Removal of an Existing Device: $105.00
Muzzle Device - Install Timed Muzzle Device - Rifle - (Shim Timed Add $15.00): $50.00
Muzzle Device - Remove Muzzle Device - AR10/AR15: $45.00
Muzzle Device - Remove Rocksett Muzzle Device: $50.00
Muzzle Device - Replace Muzzle Device - Shim Timed - AR Platform (Muzzle Device & Shims Not Included): $50.00
Muzzle Device - Replace Muzzle Device - Shim Timed - Rifle (Muzzle Device & Shims Not Included): $65.00
Muzzle Device - Suppressor Alignment Check: $10.00
New Firearm - Prep For Use: $40.00
Optic - Bore Sight (Scope or Low Power Reflex Optic): $20.00
Optic - Bore Sight Red Dot Optic: $25.00
Optic - Install Scope Mount/Rings (Picatinny Rail): $25.00
Optic - Install & Lap Rings (Stripped Receiver Holes): $50.00
Optic - Install & Level Scope in Mount/Rings - Torque Ring Cap Screws to Spec: $45.00
Optic - Install Customer Supplied Optic Mount: $45.00
Optic - Install Dovetail Mounted Red Dot Adaptor Plate: $45.00
Optic - Install Fiber Optic Front sight on Shotgun (Pre-drilled & Threaded Hole): $32.50
Optic - Install Fixed Power Optic W/Integral Picatinny Mount: $20.00
Optic - Install Magnifier & Center Objective Lens on Red Dot Reticle: $28.00
Optic - Install Optic Rail on Handgun: $85.00
Optic - Install Optics Rail or 2-Piece Mounts (Pre-Drilled Receiver): $28.00
Optic - Install Red Dot - Pistol Slide - Direct Mount (Optic Not Included): $40.00
Optic - Install Red Dot - Pistol Slide W/Adaptor Plates (Optic & Adaptor plates Not Included): $45.00
Optic - Install Red Dot Optic - Picatinny Rail Mount (Optic not included): $20.00
Optic - Install Red Dot Optic - w/Offset Rail Installation (Rail & Optic Not Included): $25.00
Optic - Install Red Dot Optic (Ring Mount): $25.00
Optic - Install Rings & Scope, without Bore Sighting: $65.00
Optic - Install Rings/Mount & Scope, with Bore Sighting: $85.00
Optic - Install Scope Rings on Rifle Action/Receiver: $40.00
Optic - Lap Rings: $35.00
Optic - Mill Pistol Slide for Red Dot Optic: $135.00
Optic - Mill Pistol Slide For Red Dot Sight - Glock Gen 3, 4 & 5: $130.00
Optic - Remove Existing Scope & Rings: $22
Optic - Replace battery - Red Dot Optic - Removal & Reinstallation of Optic Required, Battery Not Included: $22.00
Optic - Secure & Properly Torque Scope Ring Mount & Ring Cap Screws: $15.00
Pivot Pin - Install Pivot Pin, Spring & Detent - AR Platform Lower Receiver, Pin, Spring & Detent Not Included: $15.00
Receiver - Drill & Tap AR9 / AR10 / AR15 Lower Receiver for Tension Set Screw - Stripped Receiver, Set Screw Not Included: $42.50
Receiver - Drill & Tap AR9 / AR10 / AR15 Lower Receiver for Tension Set Screw - Assembled Receiver, Set Screw Not Included: $63.75
Receiver - Drill & Tap Receiver for Optic Rail/Ring Mounts, Stripped Receiver: $85.00
Receiver - Remington 870 Shotgun - Stake Shell Stop Latch: $45.00
Receiver - True Face of Upper Receiver Barrel Trunnion, Stripped AR10 / AR15 / AR9 Receiver: $30.00
Receiver Extension - Install Folding Stock Adaptor, Adaptor Not Included: $80.00
Receiver Extension - Replace Receiver Extension (AR 15 - AR10 - AR9): $60.00
Remove Pin & Welded Muzzle Device, AR Platform - Stripped Upper: $65.00
Replace Bolt Carrier Group AR Platform Rifle, Bolt Carrier Group Not Included: $5.00
Replace Receiver Extension - AR9 / AR10 / AR15, Receiver Extension Not Included: $50.00
Rocksett Muzzle Device Surcharge: $25.00
Safety - Install / Remove Safety - Sig Sauer P365, Modifications to or New Grip Frame Module Not Included: $30.00
Safety - Condition Evaluation W/Safety & Function Test: $40.00
Safety - Live Fire Safety and Function Test, Ammunition Not Included: $27.00
Safety - Replace Safety - AR Platform, Safety Not Included: $40.00
Safety - Safety / Function Test: $17.50
Scope Rings - Install & Lap Rings, Rings Not Included: $35.00
Secure and Properly Torque Action Screws: $15.00
Sight Installation/ Replacement - Smith & Wesson Pistols, Sights Not Included: $65.00
Sight Installation/Replacement - Glock Pistols, Sights Not Included: $50.00
Sight Installation/Replacement - Springfield XD, XD M, XD Mod 2 Pistols, Sights Not Included: $65.00
Sights - Bore Sight Adjustable Iron or Polymer Sights: $28.00
Sights - Install BUS Sights - AR Platform Rifle/Pistol, Sights not included: $20.00
Sights - Replace Dovetail Sight(s) - Rifle: $65.00
Sights - Replace Front Sight - Shotgun W/Ribbed Barrel: $50.00
Sights - Replace Sights - Sig Sauer Pistol Slide: $50.00
Sights - Sight Installation/Replacement - Aftermarket Pistol Slide, Sights not Included: $45.00
Sights - Sight Installation/Replacement - Pistol Slide, Sights Not Included: $65.00
Stake Shell Stop: $17.50
Stock Work - Glass Bed Barreled Action - Front Lug & Tang, Stripped Barreled Action: $250.00
Stock Work - Glass Bed Barreled Action - Front Lug Only, Stripped Barreled Action: $205.00
Stock Work - Glass Bed Barreled Action - Full Action, Stripped Barreled Action: $325.00
Stock Work - Glass Bed Barreled Action - Pre-Molded Machined Carbon Fiber Insert - Remington 700 & Remington 700 Clone Actions (LA): $625.00
Stock Work - Glass Bed Barreled Action - Pre-Molded Machined Carbon Fiber Insert - Remington 700 & Remington 700 Clone Actions (SA): $600.00
Stock Work - Glass Bed Carbon Fiber Insert w/Integral Carbon Fiber Pillars - Remington 700 & Remington 700 Clone Actions (LA): $730.00
Stock Work - Glass Bed Carbon Fiber Insert w/Integral Carbon Fiber Pillars - Remington 700 & Remington 700 Clone Actions (SA): $705.00
Stock Work - Install Adjustable Butt Stock on AR15 6 Position Carbine Receiver Extension, Stock Not Included: $10.00
Stock Work - Install Sling Studs, Studs Not Included: $45.00
Stock Work - Pillar Bed Barreled Action - Stripped Action, Pillars Not Included: $105.00
Stock Work - Repair Cracked Stock: $65.00
Stock Work - Surcharge - Husqvarna Action: $25.00
Stock Work - Surcharge - Non-Stripped Rifle/Barreled Action: $30.00
Surcharge - Part Secured with Rocksett Thread Locker ($15.00 Min): $15.00
Surcharge - Rush Service: $85.00
Surcharge: Non-Stripped Barreled Action, Excludes Trigger Assembly: $25.00
Tap Fee - (6-32 H1 3 Flute Taper HSS Hand Tap): $6.00
Tap Fee - (6-48 HSS Hand Tap): $6.50
Trigger - Install Aftermarket Trigger - AK-47 or Clone: $50.00
Trigger - Install Anti-Walk Trigger/Hammer Pins (AR Platform Rifle/Pistol): $35.00
Trigger - Install Binary Trigger, Includes Mandatory Live Fire Testing, Ammunition Not Included: $87.50
Trigger - Install Drop-in Trigger (AR Platform): $50.00
Trigger - Install Fire Control Group - AR Platform, Fire Control Group Not Included: $50.00
Trigger / Safety Function Check: $15.00
Trigger Replacement - Aftermarket or Factory - Striker Fired Pistol, Trigger Not Included: $45.00
Trigger Replacement - Aftermarket or Factory Trigger - Remington 700, Trigger Not Included: $50.00
Trigger Up-grade Kit Installation - Handgun, Kit not Included: $65.00
Trigger Work - Install Mil-Spec AR Trigger, Trigger Not Included: $40.00
Upgrades - Wraith Precision "Bullet Proof" AR9 Feeding System: $190.00
(Last Update 10/03/24)
NOW OFFERING CERAKOTE SERVICES! PLEASE VISIT OUR CERAKOTE PAGE
EMAIL US FOR QUOTES AT GUNSMITH@WRAITHPRECISION.NET
• We work on nearly all rifles, pistols and pump/semi-auto shotguns
• We offer limited service to break open, side by side and over-under shotguns
We do NOT do the following at all:
• Complete Re-Bluing (touch-ups only)
• Complete Stock Refinishing (touch-ups only)
• Revolver barrel replacements or setbacks
• Shotgun barrel work
Hourly Shop Rate: $65
Hourly Machining Rate: $85
Minimum Charge: $45
Call Us for a Quote or with Questions!
262-696-4204
If you are not in the SE Wisconsin area, but would like your firearm serviced, please Contact Us to make arrangements. Note that distance service will involve additional time due to shipping here and back, and you will need to make your payment over the phone.
